Pressure Testing

Pressure Test Rig Specification:

  1. Component Test Rig, capable of performing a strength and leakage test under water on a range of machined cast components, using compressed air.
  2. Maximum of 25 bar
  3. A leak detection unit will monitor the pressure decay and leak rate and will register a pass or fail (via red or green lights).
  4. Stainless steel test compartment with a working area of 400mm x 300mm x 200mm
  5. Fully automated programming of the PLC to ensure repeatability of the test with a Red / Green Light indication of Test approval.
  6. Leakage rate detector (PLC controlled).
  7. 4” Stainless steel pressure gauge ±1% accuracy